Mobile
Log In Sign Up
Home > english-chinese > "solid lubrication" in Chinese

Chinese translation for "solid lubrication"

固体润滑法

Related Translations:
flooded lubrication:  浸没润滑淹没润滑溢流润滑
power lubrication:  坏润滑
lubrication order:  润滑程序润滑规程润滑流程
fitting lubrication:  合适的润滑作用油嘴润滑
neutral lubrication:  中和润滑
lubrication nipple:  润滑接头润滑用螺纹接套润滑喷嘴
manual lubrication:  人工润滑
balanced lubrication:  均衡润滑
lubrication fittings:  润滑装置
wick lubrication:  油绳润滑器, 灯芯润滑
Example Sentences:
1.Scuffing failure of piston ring - cylinder liner in liquid - solid lubrication
自润滑轴承在炼铁厂托辊中应用的试验研究
2.So studies on the liquid - solid lubrication not only have great significance to lubrication theory , but also have great value in application
因此,研究液-固二相流体润滑不仅对润滑理论的发展具有重要的意义,而且也具有重要的应用价值。
3.So studies on the liquid - solid lubrication not only have great significance to lubrication theory , but also have great value in application
因此,研究液-固二相流体润滑不仅对润滑理论的发展具有重要的意义,而且也具有重要的应用价值。
4.The signal processing software was developed by vc + + tools . the modules of the software including board controlling , signal input , data saving , figure display , statistic computing , filter design , spectrum analysis , etc . based on the experiment performed on the piston ring - cylinder bore wear tester , the friction force and max scuffing load under different liquid - solid lubrication ( the solid concentrations are 0 % , 0 . 02 % and 0 . 1 % by weight , the type of particles are mos2 and udp ) is investigated in this thesis
然后,以内燃机中的活塞环-缸套摩擦副为目标,在活塞环-缸套摩擦副实验台架上进行模拟实验,考察在不同二相流润滑(润滑油分别为纯润滑油、含纳米级金刚石粉( udp ) 、二硫化钼粉( mos _ 2 )的浓度为0 . 02和0 . 1的液-固二相润滑油)条件下摩擦副的摩擦力及极限擦伤载荷的变化。
5.Based on reynolds equation and solid particles carrying model , a theoretical model for piston ring - cylinder liner lubrication in liquid - solid lubrication had been proposed . the effect of solid particles " diameter and concentration are introduced in the model . the influence of the particles " diameter and concentration on load , film thickness and friction force had been analyzed
基于reynolds方程及颗粒承载模型,引入颗粒直径、浓度等参数,并建立了分析液固二相润滑下活塞环?缸套摩擦副润滑状态的模型,探讨了不同颗粒直径和浓度对承载、油膜厚度及摩擦力的影响。
6.Based on an experiment performed on the piston ring - cylinder bore wear tester , liquid - solid lubrication is investigated in this thesis . the wear of the samples under different lubrication conditions ( the solid concentrations are 0 % , 0 . 02 % and 0 . 1 % by weight ) are discussed . the variations of the surface topography , especially the statistical parameters and functional parameters are studied , and the reasons that cause the variations are analysed
本研究基于活塞环-缸套摩擦磨损台架实验研究了液-固二相流体润滑的问题,探讨了润滑油中不含固体颗粒、含有0 . 02和0 . 1纳米颗粒三种润滑状态下的磨损情况,并进一步研究了液-固二相流体润滑状态下试件表面形貌特性的变化,主要是统计参数和功能参数的变化,并探讨了引起变化的原因,为更深入的液-固二相流体润滑问题的研究以及表面形貌设计提供理论上的参考。
Similar Words:
"solid logic technology" Chinese translation, "solid logical technology" Chinese translation, "solid looking" Chinese translation, "solid lower inter node" Chinese translation, "solid lubricant" Chinese translation, "solid lump" Chinese translation, "solid ma" Chinese translation, "solid magnetic pole" Chinese translation, "solid mandrel" Chinese translation, "solid manganese steel frog" Chinese translation